How to give your floors the RAW WOOD effect (easy to do)

7 Shares

Bare Timber Loba Invisible Unfinished look whitewash

 

Hello happy DIYers!

Today, I have the pleasure of talking about a finish that everyone seems to be loving. That is, giving your floor the RAW WOOD effect… or bare timber… or natural… or unfinished… Honestly, there are so many ways of describing this finish and its difficult to stick to one. Most ways of saying it have been taken up by wood floor finish manufacturers, calling their product one of these terms.

For example, in the video below, I use Blanchon Intensive Bare Timber. There isn’t much difference between them all the different lacquers, however, I have noticed the Bare Timber to be slightly less blotchy, with the white pigment, than other manufacturers.

An Easy-To-Do Whitewash Finish

You will be pleased to hear that achieving this stunning and elegant finish is very easy! A matter of changing lacquers. I say this in contrast to staining your hardwood floors which is exceptionally hard for beginners (I highly recommend avoiding staining if you can, it’s so easy to screw up).

All you need to do is pony-up a few more bucks for the Natural Lacquer. Unfortunately, these lacquers are a fair amount more expensive than regular lacquer. The reason for this is that these lacquers use Titanium Dioxide (TiO2) for the pigment. Other cheaper white pigments react with the tannins in the wood and can turn a yellowy green. Titanium Dioxide is more stable and doesn’t cause this problem. It’s just more expensive.

To prepare the floor, you need to follow the same sanding methods outlined on this website and in my youtube videos. Be sure to sand deep enough that all the UV damage has been removed. Otherwise, that yellowness will shine through the lacquer.

These lacquers have around a 4-6% sheen, which is as low as you can get! It looks like bare wood that has been sanded to maybe a 240 grit (which you shouldn’t do, otherwise you have adherence issues with the finish.)

Ultra-low sheen finishes hide a multitude of sanding sins, you will be pleased to hear. This is a very modern and contemporary finish.

Applying a Raw Effect Lacquer To Your Wood Floors

As for applying the finish, the following information applies to all but Bona Traffic HD Naturale. I will cover the Bona system after.

Blanchon Intensiv Bare Timber
Pallmann Pure
Loba Invisible Protect AT
… I’m blanking on the others now.

The first coat goes down very thick. I estimate roughly 7m² per litre or 75ft² per quart or 300ft² per gallon(US gallon).

Ensure that all windows are closed and there is no draught. If it’s a sunny day and you have light hitting the floor directly, cover those windows up with a towel or something else that will sufficiently block out the light.

You may want to leave window handles open, so you can pull the window open once the coat is done.

It dries very quickly on the first coat (hence the above precautions). It’s important to get the finish down as quick as possible without any imperfections.

In order to prevent dry lines, you need to roll the lacquer in lines that are no more than 3 feet wide. Brush the lacquer onto the boards at the edge of the room, at the ends of the boards, and down the side of the room. See Below.

Bare Timber Loba Invisible Application Demo

Keep working in strips like this until you have reached the door. Once the coat is down you will find it dries to the touch fairly quickly.

Recoating

You apply 3 coats of the lacquer. You only rub down after the second coat. So you don’t need to wait so long before putting on the second coat. Still, I would give it an hour and a half to 2 hours before getting the next coat down.

For the third and final coat, I would give it 4 hours before rubbing it back, maybe 2.5 – 3 hours if you have fans blowing on from immediately after you finished applying the previous coat.

It’s as easy as that!

The great thing about this finish is that it is very convincing. I mean, people really think its bare wood! My clients often tell me, after I have applied a finish like this. That they don’t want to walk on it or are afraid of spilling on it, even though its finished with 3 coats of a 2 component lacquer. That’s the same level of protection we put on school floors!

 

7 Shares

 

Ben Osborne is the owner of HowToSandAFloor.com. He is a professional wood floor refinishing specialist with 15 years of experience. Ben is responsible for almost all the content on this website. He also owns a floor sanding and restoration company.

Comments

  1. Hi Ben

    Thanks for publishing this blog. I’m excited to restore my floors. Do you think you can direct me with links to possible blogs you have on how to sand pine floorbards(Very common in Australia)? And how to fix squeaky floorboards? I ripped up our carpet to find untouched pine floorboards with no varnish nor scratches.

    Also, with wide gaps is your sawdust/resin mix enough to close them?

    Looking to do a the ‘raw’ effect/ ‘whitewashed’ look on them!

    Thank you so much and looking forward to your reply!

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.



Home | Privacy Policy | Terms | Sitemap | About | Contact

Copywrite 2021 How To Sand A Floor | All Rights Reserved | Powered by Ben Osborne